starting system fault FORD F-150 2022 Owners Manual

Page 138 of 750

SECURITY – TROUBLESHOOTING
SECURITY – INFORMATION MESSAGES
Action
Message
The system has not detected a correctly coded key.
No Key Detected
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Starting System Fault
Displays when the alarm has been triggered due to unauthor-
ized entry.
Vehicle Alarm To Stop
Alarm, Start Vehicle.
Alarm Announcement
134
2022 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202109, First-Printing Security

Page 218 of 750

The generator mode power indicator
displays the currently used power and total
available power level on the touchscreen.
When Generator Mode is switched off the
indicator displays a reduced available
power level. When generator mode is
switched on the indicator displays the full
available power.
Note:
Ensure plugged in devices do not
exceed the available power displayed on
the generator mode power indicator.
Note: Maximum power may be reduced
when the vehicle is in drive (D).
POWER OUTLET INDICATORS
- VEHICLES WITH: 2.4KW/
7.2KW
Power Outlet Status Indicator
The power outlet indicator illuminates to
let you know the status of the system. Description
Indicator Status
The power point isworking and the vehicle is on.
On
The power point is
off and the vehicle is off.
Off
The power point isin fault mode.
Flashing Generator Mode Power Indicator The generator mode power indicator
displays the currently used power and total
available power level on the touchscreen.
When Generator Mode is switched off the
indicator displays a reduced available
power level. When generator mode is
switched on the indicator displays the full
available power.
Note:
Additional indicators may be
available based on vehicle configuration.
Note: Ensure plugged in devices do not
exceed the available power displayed on
the generator mode power indicator.
WHAT IS UTILITY IDLE MODE -
VEHICLES WITH: FLIP KEY
Utility Idle mode allows you to remove the
key from the ignition and keep the vehicle
and bed power point running.
SWITCHING UTILITY IDLE ON
AND OFF - VEHICLES WITH:
FLIP KEY
Switching Utility Idle On
1. Start the vehicle. See Starting and
Stopping the Engine (page 231).
214
2022 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202109, First-Printing Power Outlet - Vehicles With: Pickup Bed Power Generator
OutletE335469

Page 242 of 750

STARTING AND STOPPING
THE ENGINE –
TROUBLESHOOTING
STARTING AND STOPPING THE
ENGINE – WARNING LAMPS
Malfunction Indicator Lamp
If it illuminates when the engine
is running, the on-board
diagnostics system is detecting
a malfunction of the vehicle emission
control system.
If it flashes, engine misfire could be
occurring. Increased exhaust gas
temperatures could damage the catalytic
converter or other vehicle components.
Avoid heavy acceleration and deceleration,
and have your vehicle checked as soon as
possible. Powertrain Warning Lamp If it illuminates when the engine
is running, this indicates a
powertrain or four-wheel drive
fault. If it flashes when you are driving,
immediately reduce the vehicle speed.
Avoid heavy acceleration and deceleration,
and have your vehicle checked as soon as
possible.
If both lamps illuminate when the engine
is running, stop your vehicle as soon as it
is safe to do so. Continuing to drive your
vehicle could cause reduced power or the
engine to stop. Switch the ignition off and
attempt to restart the engine. Have your
vehicle checked as soon as possible.
STARTING AND STOPPING THE ENGINE – INFORMATION MESSAGES Action
Message
Displays if you exceed the starting time limit. You cannot
attempt to start the engine for 15 minutes. If you cannot start
the engine after 15 minutes passes, have your vehicle imme-
diately checked.
Cranking Time Exceeded
Displays if you are unable to start your vehicle with a correctly
coded key. The system has detected a fault that requires
service. Have your vehicle checked as soon as possible.
Starting System Fault
Displays if the system does not detect a valid passive key.
No Key Detected
238
2022 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202109, First-Printing Starting and Stopping the Engine

Page 414 of 750

WHAT IS THE INTEGRATED
TRAILER BRAKE CONTROLLER
The trailer brake controller assists in
smooth and effective trailer braking based
on the towing vehicle
’s brake pressure.
INTEGRATED TRAILER BRAKE
CONTROLLER PRECAUTIONS WARNING: Use the integrated
trailer brake controller to properly adjust
the trailer brakes and check all
connections before towing a trailer.
Failure to follow this instruction could
result in the loss of control of your
vehicle, personal injury or death.
• Only use the manual control lever for
proper adjustment of the gain during
trailer setup. Misuse, such as
application during trailer sway, could
cause instability of trailer or tow
vehicle.
• Avoid towing in adverse weather
conditions. The trailer brake controller
does not provide anti-lock control of
the trailer wheels. Trailer wheels can
lock up on slippery surfaces, resulting
in reduced stability of trailer and tow
vehicle.
• The trailer brake controller is only a
factory-installed or dealer-installed
item. Ford is not responsible for
warranty or performance of the
controller due to misuse or customer
installation.
Note: Do not attempt removal of the trailer
brake controller without consulting the
Workshop Manual. Damage to the unit may
result. USING THE INTEGRATED
TRAILER BRAKE CONTROLLER
1.
Make sure the trailer brakes are in good
working condition, functioning normally
and properly adjusted. See your trailer
dealer if necessary.
Note: An authorized dealer can diagnose
the trailer brake controller to determine
exactly which trailer fault has occurred. Your
vehicle warranty does not cover issues with
your trailer.
2. Hook up the trailer and make the electrical connections according to the
trailer manufacturer's instructions.
Note: Select default mode if the trailer has
surge brakes, or no brakes at all. The system
has no effect on the braking performance
of the trailer in either of these cases.
Note: If a trailer is connected by a four-pin
connector, the trailer braking function will
not be supported.
3. When you plug in a trailer with electric or electric-over-hydraulic brakes, a
message confirming connection
appears in the information display.
4. Use the gain adjustment to find the desired starting point. A gain setting of
6.0 is a good starting point for heavier
loads.
Note: Use the following steps to adjust the
gain setting whenever road, weather and
trailer, or vehicle loading conditions, change
from when you initially set the gain.
5. In a traffic-free environment, tow the trailer on a dry, level surface and
squeeze the manual control lever
completely.
410
2022 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202109, First-Printing Integrated Trailer Brake Controller
(If Equipped)

Page 740 of 750

Reprogramming the Garage Door
Opener.........................................................208
Resetting Ground Fault Detection..........215
Resetting the Circuit Breaker - Vehicles With: 7.2kW..................................................216
Resetting the Stopping Position - Vehicles With: Power Adjustable
Steering Column........................................139
Resetting Tire Pressure Monitoring System
..........................................................538
Restarting the Engine................................244
Resuming the Set Speed..........................330
Reverse Braking Assist Indicators..........293
Reverse Braking Assist Precautions.................................................292
Reverse Braking Assist...............................292 Reverse Braking Assist –
Troubleshooting............................................ 294
Reverse Braking Assist – Troubleshooting........................................294
Reverse Braking Assist – Frequently Asked Questions........................................................ 295
Reverse Braking Assist – Information Messages......................................................... 294
Roadside Assistance..................................462
Rollover Warning
.........................................656
Route Guidance............................................631
Adjusting the Guidance Prompt
Volume.............................................................. 631
Canceling Route Guidance............................. 631
Repeating an Instruction................................. 631
Running-In See: Breaking-In................................................. 455
Running Out of Fuel
...................................250
Adding Fuel From a Portable Fuel
Container......................................................... 250
Filling a Portable Fuel Container.................250
S
Satellite Radio
..............................................607
Locating the Satellite Radio Identification
Number............................................................ 608
Satellite Radio Limitations............................ 607
Satellite Radio Settings.................................. 608
Selecting a Channel......................................... 608
What Is Satellite Radio.................................... 607
Saving a Preset Position
...........................204 Scheduled Maintenance
..........................642
Seatbelt Extensions......................................68
Seatbelt Precautions
.....................................61
Seatbelt Reminder........................................65
How Does the Seatbelt Reminder
Work..................................................................... 65
Seatbelt Reminder Audible Warnings..........67
Seatbelt Reminder Indicators.......................... 67
Switching the Seatbelt Reminder On and Off........................................................................\
. 67
Seatbelts............................................................61 Automatic Locking Mode.................................. 63
Seatbelt Reminder.............................................. 65
Sensitive Locking Mode..................................... 63
Security.............................................................132 Anti-Theft Alarm System................................ 132
Anti-Theft Alarm System Settings..............133
Passive Anti-Theft System.............................. 132
Security – Troubleshooting............................ 134
Security – Troubleshooting......................134 Security – Frequently Asked
Questions.......................................................... 135
Security – Information Messages.................134
Selecting a Drive Mode - Raptor.............351
Selecting a Drive Mode.............................350
Selecting a Four-Wheel Drive Mode - Raptor............................................................272
Selecting a Four-Wheel Drive Mode
...............................................................271
Selecting the Audio Source.....................603
Sending and Receiving a Text Message
.......................................................623
Sensitive Locking Mode...............................63 How Does Sensitive Locking Mode
Work..................................................................... 63
What is Sensitive Locking Mode.................... 63
Service Data
.....................................................28
Setting a Destination.................................630 Setting a Destination Using a Point of
Interest............................................................... 631
Setting a Destination Using a Predictive Destination....................................................... 631
Setting a Destination Using a Recent Destination....................................................... 631
Setting a Destination Using a Saved Destination....................................................... 631
Setting a Destination Using the Map Screen............................................................... 630
736
2022 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202109, First-Printing Index